High-Performance Cantilever Beam Impact Tester for Quality Assurance

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: KXJU-22M
• Packed Weight: 170kg
• MOQ: 1 Set
• Color: as Shown
• Transport Package: Standard Wooden Packing
• Specification: 700*500*1000mm
• Trademark: ZNYQ
• Origin: China
• HS Code: 9024800000
• Production Capacity: Depend
• Package Size: 700.00cm * 500.00cm * 1000.00cm
• Package Gross Weight: 170.000kg

Product Description

KXJU-22M cantilever beam impact testing machine
Overview
This testing machine is mainly used for the determination of impact toughness of non-metallic materials such as hard plastics (including plates, pipes, plastic profiles), reinforced nylon, fiberglass, ceramics, cast stone, and electrical insulation materials. It is widely used in chemical industry, scientific research units, colleges and universities quality inspection and other departments.
This instrument is a simple structure, easy operation, accurate and reliable data impact testing machine. Please read this instruction in detail before use.
This instrument is equipped with a full-color touch screen, input the size of the sample, calculate the impact strength and save the data according to the automatically collected energy loss value. This machine is equipped with a USB output port, which can directly export data through a U disk, and import the PC software with the U disk provided by our company to edit and print the experimental report.














Working Principle
A pendulum with known energy is used to strike the specimen supported as a horizontal beam. The specimen is destroyed by a single impact of the pendulum. The impact line is located in the middle of the two supports. The energy difference between the pendulum before and after the impact is used to determine the energy absorbed by the specimen when it is destroyed. Then the impact strength is calculated based on the original cross-sectional area of the specimen.

Instrument Features
²Never-out-of-tolerance quality
The instrument uses high-hardness and high-precision bearings and shaftless photoelectric sensors to fundamentally eliminate the loss caused by friction and ensure that the friction energy loss is far less than the standard requirements.
²Intelligent prompts
According to the impact situation, intelligent prompts of working conditions are given, and the experimenter is interacted at all times to ensure the success rate of the test.

Comply with Standards
It complies with the requirements of ISO180(ASTMD 256, ABNT NBR 8425, 9564.), GB/T1843, GB/T2611, JB/T 8761 and other standards.

Technical Parameters
Ø Impact speed: 3.5m/s for cantilever beam;
Ø Impact energy: 1J, 2.75J, 5.5J, 11J, 22J (select any one);
Ø Maximum friction loss energy: <0.5%;
Ø Pendulum pre-lift angle: 150±1°;
Ø Impact center distance: 335mm;
Ø Power supply: 220VAC-15%~220VAC+10%, 50Hz (single-phase three-wire system).

Configuration
1. Host: 1 unit
2. Impact hammer: 3 units
3. Weights: 2 pairs
4. Fixed jaws: 2 units
5. Hexagon wrenches: 2 units
6. Anchor screws: 4 units
7. Protective cover: 1 unit
8. Power cord: 1 unit

Operation software interface: